| PART |
Description |
Maker |
| RGB-CONTROLLER-101 |
Damage caused by misuse
|
HB Electronic Component...
|
| 44242-0001 44242-0002 44242-0003 44242-0004 44242- |
Micro-Fit 3.0垄芒 Test Plugs Won隆炉t Damage Mating Contact
Micro-Fit 3.0 Test Plugs Won’t Damage Mating Contact
|
Molex Electronics Ltd.
|
| 4171900XX-3 |
Eliminates film judder and reduces blur caused by latent
|
List of Unclassifed Manufac...
|
| RDS070N03 |
From old datasheet system
Excellent Resistance to damage from static electricity
|
Rohm CO.,LTD.
|
| KNA16200C25MA7TS KNA16220C09UA7TS KNA16390C11MA7TS |
Distributed constant type LC filter. Prevents ringing caused by circuit impedance.
|
Kyocera Kinseki Corpotation
Kyocera Kinseki Corpota...
|
| HD6433434F12 HD6433434F16 HD6433434TF12 HD6433434T |
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device.
|
Hitachi Semiconductor
|
| HD6433434F12 HD6433434F16 HD6433437F12 HD6433437F1 |
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. 12伏不能适用的S -面具模型（单电源规范），因为这可能会永久损坏设备
|
Hitachi,Ltd.
|
| HS-A1420-10 |
offering RFI shielding, and are designed to survive standard wave soldering operations without damage
|
Nel Frequency Controls,...
|
| TC1412 TC1412N TC1412NEUA713 TC1412EUA713 TC1412EP |
2A High-Speed MOSFET Drivers
The TC1412/1412N are 2A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. ...
The TC1412/1412N are 2A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. The
|
http://
Microchip
|
